DD063

TUBESOURCE TESTED™

NAI is proud to offer TubeSource Tested™, our unique line of pre-owned X-Ray tubes, CT tubes and Image Intensifiers that are performance verified to meet OEM and FDA specifications. TubeSource Tested™ products come complete with a minimum 6 month warranty and cost up to 80% less than OEM list.

Request a Quote

WHAT IS IT?

TubeSource Tested™ is a new product offering from North American Imaging like no other. TubeSource Tested products feature pre-owned X-Ray Tubes, CT Tubes and Image Intensifiers. Each product we sell is of superior quality and has a significantly longer warranty than other pre-owned glassware on the market today.

WHY ARE WE DOING IT?

Until today your choices for reliable pre-owned glassware was limited at best. No manufacturer had made the commitment to back their products with testing and warranties to ensure you could have confidence that the glassware would work at the level you’ve come to know and expect. With the NAI brand name standing behind these products you now have a credible source for Tested Glassware.

WARRANTY

All TubeSource Tested products have a minimum six month pro-rated warranty. And the first 30 days are offered with a full warranty! No other company today is as confident in their products and willing to stand behind them as we are.

WHO SHOULD CONSIDER TUBESOURCE TESTED™?

ISO’s and Insurance companies who have X-Ray and CT under contract Equipment Refurbishers
Hospitals that need to keep a room operational for a short period of time or have limited budgets
Doctors maintaining their own facility

WHAT IS THE TESTING PROCESS – X-RAY AND CT?

HOUSING

Check stator type and stator resistance
Perform “Hi-Pot” test – Stator must meet new OEM specs
Metal insert tubes receive “Spark Gap” test

HEAT EXCHANGER (IF APPLICABLE)

Cleaned of all lint and other foreign material and debris
Site Glass viewed to verify flow – must meet OEM specs
Verify pump bearings are operational and meet OEM specs
Verify fans are operational and meet OEM specs

INSERT

Perform rotor test – decibel level must be at or below 85 decibels
Check filament alignment
Check the small and large (medium if tri-focus) filaments for illumination

CAP OFF

Check for any oil leaks
Any parts causing leaks to be replaced and tube refilled and re-pumped with oil

TEST & CERTIFICATION

Measure radiation leakage to meet new OEM specs
Perform fluoro test up to max kvp and to 4mA. Must meet new OEM specs
Perform rad test up to max kvp, mAs and filament voltages. Must meet new OEM specs
Final stator re-test

COSMETICS

Sand tube
Prime tube
Re-paint to new OEM color specs (unless requested otherwise)
Apply any applicable new hardware

FINAL INSPECTION

Visual inspection before packaging
Complete QA/AC form and place in package for shipment

TESTING PROCESS – IMAGE INTENSIFIERS?

Physical inspection of Grid or Collision Sensor
Power up II
Inspect for iron spots
Determine II resolution
Perform conversion factor test (gain rate or Gx test)
Remove tested insert from housing
Prime housing
Reload insert
Calibrate power supply (if applicable)
Complete QA/QC form and place in package for shipment

Remove lens to inspect for burn-in
Inspect for artifacts – must meet new OEM specs
Inspect for shading issues
Determine II contrast ratio – must meet OEM specs
Measure brightness uniformity
Sand housing
Paint housing to original OEM specs (unless requested otherwise)
Focus optics
Final visual inspection

TUBESOURCE TESTED™

WHAT IS IT?

WHY ARE WE DOING IT?

WARRANTY

WHO SHOULD CONSIDER TUBESOURCE TESTED™?

WHAT IS THE TESTING PROCESS – X-RAY AND CT?

HOUSING

HEAT EXCHANGER (IF APPLICABLE)

INSERT

CAP OFF

TEST & CERTIFICATION

COSMETICS

FINAL INSPECTION

TESTING PROCESS – IMAGE INTENSIFIERS?

VIEW OUR INDUSTRIAL PRODUCTS

ABOUT NAI

Our Members

HAVE A QUESTION? CONTACT US TODAY!

DD063

ISO13485:2003
CERTIFIED

TUBESOURCE TESTED™

WHAT IS IT?

WHY ARE WE DOING IT?

WARRANTY

WHO SHOULD CONSIDER TUBESOURCE TESTED™?

WHAT IS THE TESTING PROCESS – X-RAY AND CT?

HOUSING

HEAT EXCHANGER (IF APPLICABLE)

INSERT

CAP OFF

TEST & CERTIFICATION

COSMETICS

FINAL INSPECTION

TESTING PROCESS – IMAGE INTENSIFIERS?

VIEW OUR INDUSTRIAL PRODUCTS

ABOUT NAI

Our Members

HAVE A QUESTION? CONTACT US TODAY!

DD063

DD063

Related Products

DD081B

DDG073GAC

DD183B

DD051

Have an account? Please sign in

Not a member yet? Create an account

ISO13485:2003 CERTIFIED

ISO13485:2003
CERTIFIED